|
Home >
Materials
Materials
ZCorporation
now offers a choice of 6 powders for use with their 3D Printers
and a range of infiltrants to enable a full range of material
properties to be achieved. The options inlcude plastic-like
properties with zp250, rubber-like properties with zp15e,
wax patterns with zp14, rigid parts with zp130 and metal parts
from Zcast tooling.
| |
Starch-based
powder |
Plaster-based
powder |
| Composition |
starch/cellulose
|
plaster
|
| Layer
Thickness |
from
0.10mm |
from
0.08mm |
| Part
Strength |
4
MPa |
10
MPa |
The plaster-based
powder is ideal for producing delicate or thin-walled parts.
If additional strength is required, the part can be infiltrated
with a range of resins to enhance the physical properties.
The starch-based powders are ideal for investment casting
and for elastomeric parts.
Materials
& Infiltrants: an overview
| |
Starch
Systems
|
Plaster
Systems
|
ZCast
System
|
| |
zp14
powder
|
zp15e
powder
|
zp250
powder
|
zp130
powder
|
ZCast
501 Powder
|
| Machine
Systems |
-
|
-
|
-
|
-
|
-
|
|
Z310,
Z406 & Z810
|
X
|
X
|
X
|
X
|
X
|
|
Z510
|
-
|
X
|
-
|
X
|
X
|
| Binders |
-
|
-
|
-
|
-
|
-
|
|
zb51
binder
|
X
|
X
|
-
|
-
|
-
|
|
zb58
binder
|
-
|
-
|
X
|
X
|
X
|
| Infiltrants |
-
|
-
|
-
|
-
|
-
|
|
Elastomer
|
-
|
X
|
-
|
X
|
-
|
|
Z-Bond
|
X
|
X
|
X
|
X
|
-
|
|
Z-Max
|
-
|
-
|
-
|
X
|
-
|
|
Z-Snap
|
-
|
-
|
X
|
X
|
-
|
|
Wax
|
X
|
X
|
X
|
X
|
-
|
|
